Industrial shisha & hookah tobacco packaging equipment · A LINEVO vertical platform.Premade pouches · Horizontal flow · Container filling · Complete lines

Sample Testing, Factory Acceptance Testing (FAT) & Inspection Workflow

Pre-shipment sample testing, sticky molasses dosing trials, and Factory Acceptance Test (FAT) checklists for shisha tobacco packaging machines and lines.

1. Why Sticky Shisha Tobacco Requires Dedicated Sample Testing

Catalog specifications—such as 50–120 bags/min on the LV-350SY Horizontal Flow Wrapper, 10–20 bags/min on the LV-350SY Premade Pouch Machine, or 10–25 bags/min on the LV-320SY Vertical VFFS Machine—describe the mechanical envelope of the machine. In real production, wet shisha tobacco performance is governed by three physical variables that only a sample test can confirm:

  1. Leaf Cut & Fibre Interlocking: Long-cut Virginia or dark-leaf tobacco bridges differently in an 80 L hopper or rotary feeder than finely chopped herbal molasses.
  2. Syrup & Glycerine Tackiness: High sugar and glycerine ratios coat chutes, augers, and forming collars unless contact surfaces and scraper timings are tuned to the recipe.
  3. Seal-Zone Contamination: A single strand of molasses-soaked leaf caught in a zipper track or cross-seal jaw causes slow pouch leaks and sticky outer packs.

2. What to Send for a Material & Packaging Trial

Whether you are evaluating a standalone wrapper or a full Shisha Tobacco Packaging Line, prepare the following trial package before locking final machine drawings:

Trial Input Recommended Quantity / Specification What the Engineering Team Verifies
Product sample or recipe brief 5–15 kg representative wet shisha (or agreed non-nicotine molasses simulant with identical cut & viscosity) Hopper bridging behavior, extruder/feeder release, and cut-off drip control (Filling Accuracy Guide)
Pre-made pouches (C1) 300–500 flat or stand-up zipper pouches per SKU + dieline PDF Magazine pickup, vacuum mouth opening, zipper clearance, and diving-spout fit
Roll-stock film (C2) 1–2 sample rolls (e.g., up to 350 mm film width for LV-350SY) + laminate structure spec Forming collar friction, fin-seal tracking, and cross-seal temperature/pressure window (Pouch Sealing Guide)
Rigid tubs / jars & caps (C3) 100–200 empty containers, screw caps, and induction foil liners Starwheel pocket fit, rim cleanliness, cap torque, and aluminum-foil seal integrity on the Filling Machine
Folding cartons & BOPP film (C4) 300–500 flat carton blanks + BOPP overwrap roll Carton erection, inner-pack insertion clearance, and 3D cellophane corner folding

3. Factory Acceptance Test (FAT) Checklist

Before any equipment leaves the factory floor, we recommend executing a structured Factory Acceptance Test (FAT)—either in person or via live multi-angle video inspection:

  1. Dimensional & Build Audit: Verify overall machine dimensions against the signed GA drawing (including confirming the installed height of the LV-320SY vertical feeder and the exact bag-width window of the LV-350SY premade pouch unit).
  2. Electrical & Pneumatic Verification: Confirm voltage and frequency (220V 50/60Hz or specified plant supply), emergency-stop circuits, guard interlocks, and air-pressure regulators.
  3. Continuous Run & Speed Check: Run a continuous trial batch at the agreed target weight (20–100 g, 100–500 g, or 50–2500 g) and record actual saleable packs per minute.
  4. Weight Distribution Log: Weigh 30 to 50 consecutive finished packs on a calibrated checkweigher and record mean weight, standard deviation, and reject-gate timing.
  5. Seal Integrity & Compression Test: Inspect heat seals for syrup inclusions, delamination, or pinholes; test induction foil seals on rigid tubs for leak-tight closure.
  6. Cleaning & Changeover Walkthrough: Demonstrate how contact hoppers, nozzles, and belts are stripped and cleaned between flavors (Cleaning & Flavor Changeover).

4. Pre-Shipment Documentation Package

Upon completion of the FAT, buyers should receive and archive:

  • Continuous unedited trial and FAT video recordings showing dosing, sealing, and checkweigher readouts.
  • Signed FAT inspection log with recorded gram weights and temperature/speed settings.
  • Electrical schematic, pneumatic diagram, and English operator/maintenance manual.
  • Packing list itemizing main equipment, format change parts, and recommended spare wear parts.

5. Schedule a Sample Review or FAT Consultation

Return to the equipment overview, review about our manufacturing scope, or message LINEVO on WhatsApp to arrange a sample evaluation for your shisha packaging project.

Configure Your Shisha Packaging Line with LINEVO Engineers

Send your shisha tobacco pack format, target gram weight, and required speed on WhatsApp to receive technical drawings, trial videos, and an itemized factory quotation, or check our RFQ preparation checklist.

Get Quote via WhatsAppBack to equipment overview